A ductless heat pump that stops heating on a cold Maine night is stressful. The good news is that a lot of “no heat” calls turn out to be something simple, like a setting, a dirty filter or a normal defrost cycle. Here are eight safe things to check before you call, and the signs that mean it’s time for a technician.
1. Check the Mode and Temperature
Make sure the remote is set to Heat, not Cool, Dry, Fan or Auto, and that the set temperature is a few degrees above the room temperature. If the remote screen is blank or faint, replace the batteries. Remotes get knocked into the wrong mode more often than you’d think.
2. Wait Out a Defrost Cycle
In cold, damp weather, frost builds up on the outdoor coil. The system reverses for a few minutes to melt it, and during that time the indoor unit stops blowing warm air and the outdoor unit may steam. This is normal. Heat comes back on its own, usually within 5 to 15 minutes.
3. Clean the Indoor Filters
Lift the front panel of the indoor unit and slide out the mesh filters. If they’re gray with dust, rinse them in lukewarm water, let them dry fully, and put them back. Clogged filters cut airflow and heat output, and they’re the most common cause of weak heat.
4. Look at the Outdoor Unit
The outdoor unit needs to breathe. Clear snow drifts away from it, and make sure the top and sides aren’t buried or blocked by snow sliding off the roof. If the coil is encased in ice that doesn’t clear after a defrost cycle, turn the system off and call. Don’t chip at ice with tools; the coil fins are easy to damage.

5. Check the Breaker and Disconnect
Look for a tripped breaker labeled for the heat pump in your panel, and check that the outdoor disconnect switch is on. If a breaker trips once, you can reset it once. If it trips again, leave it off and call. A breaker that keeps tripping is a sign of an electrical or equipment problem.
6. Look for a Blinking Light or Error Code
A repeating blink pattern on the indoor unit usually means the system has detected a fault and stored a code. Our guide to mini split error codes explains how to read it. Write the code down before you call; it helps us bring the right parts.
7. Give It Time After an Outage
After a power outage or flicker, many heat pumps wait several minutes before restarting to protect the compressor. If the power just came back, give it 5 to 10 minutes before assuming something’s wrong.
8. Know What’s Normal on the Coldest Nights
Cold-climate heat pumps keep heating well below zero, but their output does drop as the temperature falls. On the coldest nights, rooms far from an indoor head may run cooler, and that’s when backup heat earns its keep. Read more in Can heat pumps heat a Maine home all winter?
When to Call for Repair
- The unit blows cold air in Heat mode for more than 20 minutes and it isn’t defrosting.
- The same error code keeps coming back.
- The breaker trips again after one reset.
- The outdoor unit stays encased in ice, or the fan won’t spin.
- Water is dripping from the indoor unit.
- You hear grinding, banging or loud buzzing, or smell burning.
We repair Daikin and Bosch systems most often, along with other brands. See heat pump repair.
Prevent It Next Winter
Most no-heat calls trace back to dirty coils, clogged filters and drains, or connections that loosen over time. A yearly Complete Clean catches these before January, and the BANN Heat Pump Club puts that cleaning on a schedule.
Heat Pump Not Heating FAQ
Why is my heat pump blowing cold air in heat mode?
The most common reason is a defrost cycle, which pauses heat for a few minutes in cold, damp weather. If it lasts more than about 20 minutes, check the mode, filters and outdoor unit, then call for service.
Why is my outdoor heat pump unit covered in ice?
Some frost is normal and clears during defrost. Heavy ice that doesn’t clear can mean a defrost, airflow or refrigerant problem and needs a technician.
Should I turn my heat pump off when it’s very cold?
No. Cold-climate heat pumps are designed to keep running in Maine winters. Turning them off and on can make the house harder to heat back up.
How often should a ductless heat pump be cleaned?
Rinse the indoor filters every month or two during heavy use, and have a full professional cleaning once a year.
Heat Pump Still Not Heating?
BANN diagnoses and repairs ductless heat pumps across Southern and Midcoast Maine. Call with the brand, model and any error code.
Heat Pump RepairCall 207-406-3918